This rolling grille is built in a brick formation using horizontal aluminium tubes and vertical links, which are ideal for shopfronts, counters, car Parks or areas requiring high security whilst still allowing good air flow and delivers maximum visibility. All rolling grille shutters can be powder coated in any RAL colour.
Tube and link roller grille in brick-bond or inline pattern
Manual push up/pull down operation or electric operation by internal tubular motor with manual override facility. Safety brake fitted when required.
Bottom rail central key lock, guide pin locks, or ground padlocking system.
Electrically operated grilles are generally self-locking. For additional security Shopfronts Shutters recommends guide pin locks or a ground padlocking unit combined with a motor isolator box.
Available in two patterns:
Brick bond pattern (aperture size 225mmW x 65mmH)
Inline pattern (aperture size 110mmW x 65mmH)
Powder Coated – Over 200 RAL colours to choose from
Clear opening height (to underside of box):
2400mm, box size 305mm square;
3000mm, box size 355mm square;
5000mm, box size 385mm square.
5000mmW x 5000mmH
7000mmW x 5000mmH
Our Electric Rolling Grille Shutters come with the following features:
50 mm x 50 mm steel box section (both sides) used to allow for motor unit and safety brake.
75 mm x 50 mm box section will be used for shutters over 160 kg in weight (5000 mm x 3200 mm approximately).
50 mm x 75/100 mm angles, where required.
All Rolling Grille Shutters can be powder coated in any standard RAL colour.
